Charging & docks
Request item
MT1 Charging Station MSBC01
Part number11020-000016
Original charging station for autonomous return-to-charge workflows.
MT1MT1 VacMT1 Max
Request this part
Serial number recommended
Charging stations, batteries, wear parts, sensors, motors, electronics, and upgrade modules - all original PUDU, supported for our 8-model lineup: MT1, MT1 Vac, MT1 Max, CC1, CC1 Pro, T300, T600, and T600 Underride. Send the robot model and serial number; we will identify the correct U.S.-ready part.
Built like a product catalog, but without public pricing. Customers can identify the part, check compatible models, and request the exact item with robot serial number, photo, or fault message.
Original charging station for autonomous return-to-charge workflows.
US charger for MT1 line service and replacement needs.
Contact electrode replacement kit for dock reliability.
Docking station support, charging contact parts, and dock wear items.
Dock, water exchange, cleaning station, and contact assemblies.
Charging contacts, cable sets, covers, and charging workflow parts.
Charging contact and dock support for heavy AMR workflows.
Two-piece side brush set for scheduled cleaning maintenance.
Main rolling brush for standard MT1 line sweeping.
MT1 Max removable brush for faster field replacement.
Filter set for dust control and sustained suction performance.
Vacuum assembly rubber set for high-frequency wear replacement.
Reusable dustbag set for daily vacuum operation.
Dust mopping cloth set for mixed-surface routes.
HEPA F11 replacement set for vacuum filtration.
Higher-filtration accessory for facilities with stricter air requirements.
Squeegees, suction bar parts, seals, and wet-cleaning wear items.
Filter chamber support and replaceable cleaning-system parts.
Brushes, mop pads, and scheduled wear parts for wet cleaning.
Replacement battery pack for MT1 runtime recovery.
Replacement battery pack for MT1 Vac and MT1 Max.
Critical drive replacement part for cleaning robot mobility.
Drive wheel and caster support for T300 route uptime.
Drive wheels, casters, brake-related parts, and movement-critical items.
Main control board replacement, confirmed before shipment.
MT1 Max master controller board for advanced diagnostics.
PCBA boards and electronic modules for T300 field service.
Replacement switches, buttons, and related operator-interface parts.
Connection cables and harness support for T300 repairs.
Camera module for navigation and environment sensing.
VSLAM camera, model-specific version confirmed before order.
High-value LiDAR component for MT1 Max navigation.
Front collision and safety sensor support for T300.
Scheduled wear-part package built around floor type and weekly runtime.
Critical spare-part planning for facilities where AMR downtime affects production.
From the CC1 / CC1 Pro Academy material, the station layer is a serious part of uptime: charging, docking, auto water exchange, clean station components, and mobile water support.
Docking support, charging contacts, alignment parts, and dock wear items for wet-cleaning routes.
Request dock supportCharging pile and charging-station support for facilities that do not require a full water-exchange station.
Request charging supportCC1 / CC1 Pro clean station planning for water source, floor drain, power, station communication, and service parts.
Request station reviewOptional water workflow support for facilities where fixed plumbing is not ready or not practical.
Request water-station supportFrom the official T300 and T600 series materials, the AMR sale is not only the robot. The route needs racks, conveyors, order-to-person logic, charging, and facility-specific safety review.
For line feeding and handoff points where the robot needs to connect with a conveyor or transfer station.
Request conveyor reviewFor picking, staging, fulfillment, and repetitive item movement where the robot brings material to the worker.
Request workflow supportFor T600 and T600 Underride deployments where rack clearance, lift height, and aisle geometry decide success.
Request rack reviewCharging piles, contacts, dock placement, route timing, and battery planning for multi-shift AMR operation.
Request charging supportNot sure which part fits your robot? Call Emma with your serial number and we'll help identify the correct part.
Autonomous charge docks, docking bases, and water stations for self-refill. Essential for 24/7 operation.
Original Li-ion packs matched to each robot's BMS. Safe charge cycles, full runtime restored.
The consumables that decide cleaning quality. Swap on schedule - keep performance consistent.
LiDAR, cameras, depth and collision sensors. Clean sensors = accurate maps = reliable autonomy.
Drive trains, omni-wheels, spare tires, motor assemblies, brake switches. Keep the robot moving.
The brain and face of the robot. PCBA boards, touchscreens, switches, control modules.
Wi-Fi, 4G LTE, LoRa, Bluetooth, and ESP modules. Keep fleet connectivity rock-solid.
Housings, side panels, brackets, lifting modules, boundary strips. Protection & upgrades.
If you bought from us, we already know your build. If you bought elsewhere, send us your serial and we'll pull the correct parts.
T300Compact AMR 300kg
T600Payload AMR 600kg
T600 UnderrideLow-profile AMR
CC14-in-1 cleaner
CC1 ProAI 4-in-1 cleaner
MT1AI sweeper
MT1 VacVacuum sweeper
MT1 MaxHeavy-duty industrial sweeper
Tell Emma your robot model and the issue. We will identify the part, check support options, and follow up privately.
Yes. We source exclusively from PUDU. Every part ships with the manufacturer warranty intact and is compatible with your robot's firmware and service plan.
Call us with your serial number or build code. We'll verify compatibility, confirm the correct part, and recommend any related items that usually fail together. If you bought the robot from us, we already have your config on file.
Either. Wear parts (brushes, filters, pads) are easy to swap yourself - we include a fit guide. For electronics, motors, sensors, or calibration-critical parts, our technicians come on-site in IL/WI/IN. We also offer step-by-step remote support for self-install.
Stocked items ship same or next business day from Wheeling, IL. Non-stock parts are prioritized directly from PUDU and typically arrive in 7-10 business days - faster than importing yourself.
Yes. We offer preventive maintenance contracts with scheduled wear-part replacement, priority stock reservation, and optional loaner robots for critical downtime. Ask Emma about service plans when you call.
Absolutely. Share your serial number and we'll cross-check compatibility. Parts and service from GotBots don't require that the robot was originally purchased through us.